A unique D-ring is accessible along the bottom of the shade in the very center, to gently pull for easy raising and lowering. In addition to the center D-ring, there is a white pull knob on the side of every shade along the back, fixed directly to the sheathed lift cord.
When the shade is fully extended and covering the window, use the white pull knob along the bottom instead of the D-ring. This will initiate the spring mechanism within the tube, raising the shade back up to the top of the window.
Please note that ALL of our custom shades are fabricated in compliance with the latest ANSI/WCMA safety standards.
There are 3 different lift systems available for our custom shades, pictured above.
If you do not specify a lift mechanism for your custom shade quote, we will include our default Rollease clutch lift system with your estimate.
Regardless of lift system, your shade will have a beautiful finish along the front and a similar fabrication process on the back, with child-safe lift cords fixed to the lining to raise and lower the fabric as the shade moves up and down.
Please keep in mind the following guidelines for your next Cordless Control Roller Shade design:
Minimum width 32" with up to 48" maximum width
Maximum length up to 84"
Minimum projection: 2.5"
No heavy face fabrics, no interlining, no blackout lining
Select styles available...
Pleated Hem Roman
Casual Roman with Tails
And don't forget to check out more of our custom shade blog posts...